Products

Nav Menu 2





Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PUMPS (WELL) > WELL & JET PUMPS
Sort By:
1 2
PUMP SHALLOW WELL CAST 1/2HP
Superior Pump 94505 Shallow Well Jet Pump, 1/2 hp, 1-1/4 NPT Inlet, 1 in Outlet, 25 ft Suction Lift, 67 psi Inlet
Our Price: $179.99

Rugged cast iron pump body for durability. Tough thermoplastic impeller. Glass filled thermoplastic diffuser. Cast iron seal plate. Pre-mounted, fully adjustable pressure switch. For shallow well applications up to 25' depth. 1-1/4 NPT suction, 1" discharge/ drive port, 67 psi maximum pressure, 12.5 gpm flow rate, 1 year warranty from Superior Pump.
Sta-Rite Industries FP4012-10 Flotec
Flotec FP4012-10 Shallow Well Jet Pump, 1/2 hp, 1-1/4 in NPT Inlet, 1 in NPT Outlet, 230/115 V, 60 Hz, 9.4 A
Our Price: $219.99

Shallow well jet pump with built-in pressure switch. Superior performance at depths to water of 25' or less. 1/2 HP pumps up to 8 GPM. 3/4 HP pumps up to 12 GPM. 1 HP pumps up to 18 GPM.  Fiberglass-reinforced thermoplastic pump housing for the highest corrosion-resistance. Heavy-duty dual-voltage motor - 1/2 HP preset at 115V; 3/4 HP and 1 HP preset at 230V. Self-priming after pump housing is initially filled. CSA certified.
Bur-Cam Pumps 506321 Convertible Jet Pumps
Burcam 506321 Convertible Jet Pump, 1/2 hp, 1/4 in Inlet, 1 in Outlet, 115/230 V, 65 psi Case, Cast Iron
Our Price: $219.99

Cast iron convertible jet pump. SW operation 0-25' with ejector screwed on pump body. DW operation 0-80' with 2 pipes and ejector down in the well. High performance noryl impeller, industrial motor totally enclosed, fan cooled. full time connected run capacitor, to eliminate starting wear vs regular motor. thermal and overload protection, built for a continuous use. 1/2 hp TEFC motor, 115/230v. maximum pressure of 85 psi. capacity at 20 psi: 650 gph/ 5', 565 gph/10', 485 gph/15', 365 gph/20', 245 gph/25', 575 gph/30', 465 gph/40', 365 gph/50,' 170 gph/80,'  1" NPT suction. 1" NPT discharge. 38 lbs (17.27kg)
PUMP CONVERTIBL WELL CAST1/2HP
Superior Pump 94515 Convertible Jet Pump, 1/2 hp, 1-1/4 NPT Inlet, 1 in Outlet, 25 ft Suction Lift, 58 psi Inlet
Our Price: $219.99

Rugged cast iron pump body for durability, Tough thermoplastic impeller. Glass filled thermoplastic diffuser. Cast iron seal plate. Pre-mounted, fully adjustable pressure switch. For shallow well applications up to 25' depth. Can be used in deep well applications.  1-1/4" NPT suction, 58 psi maximum pressure, 9.9 gpm mas flow rate, 1" discharge/ drive port.Deep well conversion assembly included. 6.4/3.2 amps. 1 year warranty from Superior Pump.
Sta-Rite Industries FP4022-08 Flotec
Flotec FP4022-10 Shallow Well Jet Pump, 3/4 hp, 1-1/4 in NPT Inlet, 1 in NPT Outlet, 230/115 V, 60 Hz, 6.1/12.2 A
Our Price: $229.99

Shallow well jet pump with built-in pressure switch. Superior performance at depths to water of 25' or less. 1/2 HP pumps up to 8 GPM. 3/4 HP pumps up to 12 GPM. 1 HP pumps up to 18 GPM.  Fiberglass-reinforced thermoplastic pump housing for the highest corrosion-resistance. Heavy-duty dual-voltage motor - 1/2 HP preset at 115V; 3/4 HP and 1 HP preset at 230V. Self-priming after pump housing is initially filled. CSA certified.
Sta-Rite Industries FP4212-08 Flotec
Flotec FP4212-08 Convertible Jet Pump, 1/2 hp, 1-1/4 in NPT Inlet, 1 in NPT Outlet, 115/230 V, 60 Hz, 9.9/4.95 A
Our Price: $229.99

Rugged cast iron construction. Superior performance at depths to water of 100' or less. 1/2 HP pumps up to7.9 GPM. 3/4 HP pumps up to 11.9 GPM. Heavy-duty dual-voltage motor - 1/2 HP preset at 115V; 3/4 HP preset at 230V. Prewired pressure switch preset for 30/50 PSI operation. Self-priming after pump housing is initially filled. Built-in pressure regulator. CSA certified. Jet kit sold separately.
Sta-Rite FSNCH-L Sta-Rite
Sta-Rite FSNCH-L Shallow Well Jet Pump, 1/2 hp, 1-1/4 in NPT Inlet, 3/4 in NPT Outlet, 115/230 V, Stainless Steel
Our Price: $239.99

Built-in shallow well jet has corrosion-resistant nozzle, venturi and check valve. Close-grained cast iron pump body and base. Built-in check valve to prevent accidental loss of prime. Dust-proof cover to protect all electrical components from dust and insects. Motor features stainless steel shaft, heavy-duty ball bearings, balanced rotor and insulated motor windings. Pre-set, pre-wired pressure switch for automatic operation when used with water system tank. Top or side discharge-simplifies installation. 1-1/4" NPT suction and 3/4" NPT discharge. Dual voltage 115/230V; factory set at 230V. Wiring diagrams are permanently affixed on each motor for easy field change to 115 volt. Pressure switch setting 30-50. CSA certified.
Wayne Pumps CWS50 Deep Well Jet Pumps
Wayne Pumps CWS50 Convertible Jet Pump, 1/2 hp, 1-1/4 in NPT Inlet, 3/4 in NPT Outlet, 120/240 V, 50 psi Case
Our Price: $239.99

1/2 HP and 3/4 HP cast iron convertible jet well pump. Assembled in the US with foreign and domestic parts. 3/4 in. NPT discharge with 1 1/4 in. NPT suction and 1 in. drive. Dual voltage (120V/240V) high efficiency square flange motor (factory set for 240V). Pressure switch is pre-set at 30-50 PSI for automatic operation. Max flow rate of 408 GPH at 0 ft. (50 PSI/CWS50) and 462 GPH at 0 ft. (50 PSI/CWS75). Durable cast iron volute with dedicated priming port for volute filling. For wells 0 ft. - 90 ft. in depth. Jet assembly required (sold separately).
Sta-Rite Industries FP4222-08 Flotec
Flotec FP4222-08 Convertible Jet Pump, 3/4 hp, 1-1/4 in NPT Inlet, 1 in NPT Outlet, 230/115 V, 60 Hz, 6.19 A
Our Price: $249.99

Rugged cast iron construction. Superior performance at depths to water of 100' or less. 1/2 HP pumps up to7.9 GPM. 3/4 HP pumps up to 11.9 GPM. Heavy-duty dual-voltage motor - 1/2 HP preset at 115V; 3/4 HP preset at 230V. Prewired pressure switch preset for 30/50 PSI operation. Self-priming after pump housing is initially filled. Built-in pressure regulator. CSA certified. Jet kit sold separately.
Wayne Pumps CWS75 Deep Well Jet Pumps
Wayne Pumps CWS75 Convertible Jet Pump, 3/4 hp, 1-1/4 in NPT Inlet, 3/4 in NPT Outlet, 120/240 V, 50 psi Case
Our Price: $269.99

1/2 HP and 3/4 HP cast iron convertible jet well pump. Assembled in the US with foreign and domestic parts. 3/4 in. NPT discharge with 1 1/4 in. NPT suction and 1 in. drive. Dual voltage (120V/240V) high efficiency square flange motor (factory set for 240V). Pressure switch is pre-set at 30-50 PSI for automatic operation. Max flow rate of 408 GPH at 0 ft. (50 PSI/CWS50) and 462 GPH at 0 ft. (50 PSI/CWS75). Durable cast iron volute with dedicated priming port for volute filling. For wells 0 ft. - 90 ft. in depth. Jet assembly required (sold separately).
   
 
1 2

Copyright © Donohoo Enterprises, Inc.. All Rights Reserved.
Built with Volusion