|
|
|
|
 |
Hyde 45760 Push Glazier Point
|
|

Hold glass to sash under putty. Made with a T to be pushed into wood sash with putty knife.
|
|
 |
|
|
|
|
 |
General Tools 8501 Ball End Glass Cutter, 5 in L Steel Body
|
|

Cuts plate glass from 1/8" to 1/4" thick. Steel wheel with honed angle of 120 degrees for cutting single and double strength glass. Tooth design to remove rough edges. Ball end handle for snapping of scored glass.
|
|
 |
|
|
|
|
 |
Plaskolite 1999999A Cutter Tool, Acrylic Plastic
|
|

For cutting rigid plastics. The easiest and sharpest way to cut Plaskolite panes. Place a straight edge along the line to be cut. Make several cuts along the edge until the score line can be cracked with light pressure of the thumbs at the cut.
|
|
 |
|
|
|
|
 |
Flex-o-glaze CT12 Acrylic Cutter
|
|

Fast, accurate cuts in acrylic Flex-o-glaze, other plastic sheet, vinyl tile and aluminum.
|
|
 |
|
|
|
|
 |
Hyde Tools 45700 Glass Cutter, Ball End - Steel Alloy Wheel
|
|

For straight and curved cuts in glass and mirrors. Precision made steel alloy cutting wheel. Balanced cast metal handle.
|
|
 |
|
|
|
|
 |
MintCraft 17001 Tile and Glass Cutter, 6 in, Tungsten Carbide Cutting Edge Zinc Alloy
|
|

Can be used to cut tile and glass. Made of zinc alloy handle and tungsten carbide cutting wheel.
|
|
 |
|
|
|
|
 |
Fletcher-Terry 01-115/01ACP Glass Cutter
|
|

Features "Classic" contoured comfort grip handle in straight end style. Cast from superior grade steel for durability and longevity. Recommended glass thickness - 2 to 3mm.
|
|
 |
|
|
|
|
 |
Fletcher Terry 01-122/02ACP Ball End Glass Cutter, Steel Body
|
|

Features "Classic" contoured comfort grip handle in ball end style. Cast from superior grade steel for durability and longevity. Recommended glass thickness - 2 to 3mm.
|
|
 |
|
|
|
|
 |
Gold Tip 01-128/07-CP Ball End Glass Cutter, Steel Body
|
|

114-degree steel wheel die cast, ball end. Uses carbide wheel for performance longevity. Recommended glass thickness - .75 to 1.5mm.
|
|
 |
|
|
|
|
 |
MintCraft 14300 2-In-1 Glazing Tool, 12 in L, High Carbon Steel
|
|

Use flat end to clean out old putty. Use v-shape end to apply and smooth new putty. High carbon steel blade.
|
|
 |