Products

Nav Menu 2





Home > HARDWARE > CONSTRUCTION HARDWARE > JOIST HANGERS & CONNECTORS
Choose a sub category:
JOIST HANGERS FRAMING ANGLES/ANCHORS
MENDING PLATES NAIL PLATES
POST ANCHORS / CAPS FENCE BRACKETS
BRIDGING INSULATION SUPPORTS
STRAPS PLYWOOD CLIPS
FOUNDATION ANCHORS BRICK/WALL TIES
MISC CONSTR HARDWARE
Sort By:
1 2 3 ... 14
RH Tamlyn BT 22SP Corrugated Straight Brick Wall Tie
RH Tamlyn BT 22SP Corrugated Straight Brick Wall Tie, 7/8 in, 1370 lb, 22 ga Steel
Our Price: $0.07

Masonry accessory used to tie a brick veneer to the exterior of the house. 2 holes provide for nailing on one end; other end is bent to lie between the mortar joints. Follow local codes for spacing. 6-3/8" x 7/8". Boxed.
RH Tamlyn BT22ZZSP Corrugated Scalloped Zig Zag Brick Wall Tie
RH Tamlyn BT22ZZSP Corrugated Scalloped Zig Zag Brick Wall Tie, 7/8 in, 1370 lb, 22 ga Steel
Our Price: $0.07

Masonry accessory used to tie a brick veneer to the exterior of the house. 2 holes provide for nailing on one end; other end is bent to lie between the mortar joints. Follow local codes for spacing. 6-3/8" x 7/8".
RH Tamlyn BT28ZZ5SP Corrugated Scalloped Zig Zag Brick Wall Tie
RH Tamlyn BT28ZZ5SP Corrugated Scalloped Zig Zag Brick Wall Tie, 7/8 in, 604 lb, 28 ga Steel
Our Price: $0.08

Masonry accessory used to tie a brick veneer to the exterior of the house. 2 holes provide for nailing on one end; other end is bent to lie between the mortar joints. Follow local codes for spacing. 6-3/8" x 7/8".
RH Tamlyn BT28500SP Corrugated Straight Brick Wall Tie
RH Tamlyn BT28500SP Corrugated Straight Brick Wall Tie, 7/8 in, 604 lb, 28 ga Steel
Our Price: $0.08

Masonry accessory used to tie a brick veneer to the exterior of the house. 2 holes provide for nailing on one end; other end is bent to lie between the mortar joints. Follow local codes for spacing. 6-3/8" x 7/8". Boxed.
USP Lumber JDS24 Double Shear Saddle Purlin Hanger
USP Lumber JDS24 Double Shear Saddle Purlin Hanger, 2 X 4 in, 18 ga T, 960 - 1155 lb, Steel
Our Price: $2.79

Designed for quick installation of purlins between rafters, joists or trusses in post and beam structures. One-piece construction assures a consistent flush fit between purlin and joist or rafter. A reinforced "double lap" seat boosts the load capacity of this heavy-duty purlin hanger. Requires (4) 10d x 1-1/2" nails for header and (4) 10d" nails for each purlin. Features a 1-9/16" top fold; pending IAPMO-ES evaluation.
USP Lumber JUS210-2TZ Double Shear Slant Joint Hanger
USP Lumber JUS210-2TZ Double Shear Slant Joint Hanger, 2 in L X 10 in H, 1800 lb, 18 ga Steel
Our Price: $5.39

Double shear nailing for fewer nails and faster installation. Dimples allow for 45 degree nailing through joist into header, resulting in higher loads and less nailing, and eliminate need for shorter joist nails in 2x applications. Meets ICC-ES ESR-1881, FL821, L.A. City RR25779, Dade county, FL 11-0510.01 and 07-0419.01 codes. For additional information including allowable loads and fasteners. Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.
RH Tamlyn PCS716 Plywood Clip
RH Tamlyn PCS716 Plywood Clip, 20 ga Steel, Galvanized
Our Price: $9.99

Replace wood blocking on roof sheathing. Tight fit for positive installation. Embossed dimples provide 1/8" gap needed to prevent panels from popping up as sheathing expands. G60 galvanizing finish. 20 Gauge - Boxed.
RH Tamlyn PCS12 Plywood Clip
RH Tamlyn PCS12 Plywood Clip, 20 ga Steel, Galvanized
Our Price: $9.99

Replace wood blocking on roof sheathing. Tight fit for positive installation. Embossed dimples provide 1/8" gap needed to prevent panels from popping up as sheathing expands. G60 galvanizing finish. 20 Gauge - Boxed.
RH Tamlyn PCS1532 Plywood Clip
RH Tamlyn PCS1532 Plywood Clip, 20 ga Steel, Galvanized
Our Price: $9.99

Replace wood blocking on roof sheathing. Tight fit for positive installation. Embossed dimples provide 1/8" gap needed to prevent panels from popping up as sheathing expands. G60 galvanizing finish. 20 Gauge - Boxed.
RH Tamlyn PC1532 Plywood Clip
RH Tamlyn PC1532 Plywood Clip, Aluminum, Mill
Our Price: $9.99

With built-in spacer for use when support spacing exceeds the maximum length of an unsupported edge. Boxed.
   
 
1 2 3 ... 14

Copyright © Donohoo Enterprises, Inc.. All Rights Reserved.
Built with Volusion