Products

Nav Menu 2





Home > HAND TOOLS > TRADESMAN TOOLS > SIDING & GUTTER TOOLS
Choose a sub category:
SIDING & GUTTER TOOLS
Sort By:
1 2 3
Malco SRT2 Siding Removal Tool
Malco SRT2 Siding Removal Tool, 6-1/4 in L, Steel
Our Price: $6.99

Smooth unlocking motion of a burr free hook. Durable one piece spring steel construction is virtually indestructible. Blade is angled from the bottom plane of the handle. Easy to grasp non-slip textured handle grip with a 1/4" handy oversize hang hole in handle. Length: 6-1/4".
Malco TNP2S Trim Nail Punch
PUNCH TRIM NAIL 8 INCH HVY DTY
Our Price: $14.99

Drive trim nails into soffit, fascia and other finishing trim without denting or marring material. All steel nose and aluminum tail piece directs weight of this punch to the working end when grasping or starting a nail. Accommodates up to 1-1/4" (31.2 mm) standard trim nails.
Malco FCFG Siding Facing Gauge
Malco FCFG Siding Facing Gauge, 5 in L, Nylon, Red
Our Price: $14.99

Manufactured of tough, long-lasting, weather-resistant nylon material. Use the facing gauge while working across the width of the plank for greater accuracy of the desired exposure and guards against sagging. The facing gauge may also be used in combination with the Malco Overlap Gauge [SKU#119.9975]  to prop up one end of the plank for one-person application. Adjustable for precise 5",  6", 7" or 8" exposures.
Malco SL5 Snap Lock Punch
Malco SL5 Snap Lock Punch, 1/2 in W x 3/8 in D Jaw, Alloy Steel, Red Vinyl Handle
Our Price: $17.99

Add snap lock plastic skirting and siding to finishing trim. Makes tabs in the cut edge of siding panel. Used as a finishing course at top of wall or below window. Tabs lock into utility trim. Punch raises a high projection to compensate for natural relaxation of vinyl plastic. It also works well on aluminum siding but is not recommended for steel. NOTE: Should not be used when PERMATABS are required to snap into finished trim. Throat depth is 3/8"; length is 9".
Malco FCG2 Overlap Siding Gauge With 5/16 in Fiber Cement Siding
Malco FCG2 Overlap Siding Gauge With 5/16 in Fiber Cement Siding, 6 in L X 5/16 in T, Steel, Silver
Our Price: $25.99

Strong, one-piece tempered spring steel construction with precision-ground tip assures gauge will grip behind siding plank. No adjustments to vary and nothing to mark. Will not mar finish of pre-painted siding. Works with 5/16" (7.9 mm) fiber cement siding. Permits 1-person application of panels. Two gauges support entire length of panel and precisely gauge a standard 1-1/4 inches (31.2 mm) overlap.
Malco Redline 5-Blade Pipe Crimper
Malco Redline 5-Blade Pipe Crimper, 1-5/8 in W X 1-5/8 in D Jaw, Soft-Touch Non-Slip Grip
Our Price: $34.99

A superior compound leverage mechanism offers maximum ease of operation. Comfortable opening, spring-actuated handles, give additional comfort and control. Ergonomic REDLINE Handles with unique one-hand operation latch offer maximum compound leverage performance and natural fit and feel.
Malco Redline Downspout Crimper
Malco Redline Downspout Crimper, 1-1/4 in W X 1-1/4 in D Jaw, Soft-Touch Non-Slip Grip
Our Price: $34.99

Produces a double crimp that downsizes without deforming down-spout; walls stay square for a tight fitting, leakproof connection. Tool also features rust resistant plating. Ergonomic REDLINE handles with unique one hand operation latch.
Redline NHP1R Nail Hole Punch
Redline NHP1R Nail Hole Punch, 5/32 X 3/4 in Hole, 5/8 in Thick
Our Price: $37.99

For punching holes in vinyl and aluminum siding. Punches horizontal slot for adding or elongating nail holes in siding to accommodate irregular stud spacing.  Slot: 5/32" x 3/4";  5/8'' Throat Depth; Length 8-1/2". Ergonomic REDLINE handles with unique one hand operation latch.
Andy MV12 Combination Snip
Andy MV12 Combination Snip, 12 in L Vinyl Grip, Steel
Our Price: $39.99

Strong aluminum frame with comfortable vinyl grips. Big 3-inch (76 mm) high carbon steel blades with a knife-like edge. Makes precise left or right circular cuts to 6-inch (15 cm) diameter and fast straight cuts. Cuts thick or layered vinyl and a variety of other flexible non-ferrous materials; not for use on sheet metal. Replacement blade MV12RB.
Redline JCCR 1-Piece J-Channel Cutter
Redline JCCR 1-Piece J-Channel Cutter, 5/8 in, 1-1/4 in Depth Blade, Heat Treated Steel
Our Price: $39.99

Use for making drain tabs and notches in  5/8" J channel. Stop gauge to adjust cutting depth for various profiles. Compound leverage for smooth and easy cutting action ergonomic REDLINE handles with unique one hand operation latch. Grip is color coded for easy tool identification. Durable all steel construction, rust resistant nickel chrome and black oxide finishes prolong the life of the tool.
   
 
1 2 3

Copyright © Donohoo Enterprises, Inc.. All Rights Reserved.
Built with Volusion